Car owners should know more about the cooling system in their vehicles. In this case, engine is actually equal to a boiler in steam engines and heat must be dispersed externally to avoid permanent damages. Instead of using coal and firewood, our engines burn gasoline. Modern car engines operate at very high temperature, especially at more than 200 degree Fahrenheit. In this case, we should make sure that car models we choose have excellent cooling system. Model car engines should have excellent cooling system and water boils at 212 degree Fahrenheit at sea level. In this case, when the engine has reached more than 212 degree Fahrenheit, the coolant will turn into steam and they need to be replaced. This means that empty space inside the radiator will be filled with pressurized steam.

Car engine will continue to produce heat and it is important to make sure that it doesn’t accumulate. The water pump should also work well in moving coolant through the radiator and engine block. In this case, we should make sure that the radiator could properly do its job. In this case, coolant should be pumped regularly to the radiator, to make sure that excess heat can be removed from the system. We should be aware that the air pressure inside the engine is higher than the normal air pressure. So, it is important to make sure that we don’t open the radiator cap when it is hot. The cooling system should also have proper integrity, because the coolant will try to get out. Any tiny crack will allow steam to escape. Eventually, cracks could widen and hot water will start to get out. In this case, the coolant level will get lower quickly and the engine could seize.

In normal cars, eventually the whole system will cool down below the normal boiling temperature. High pressure steam will return into liquid coolants. However, we should be aware that small amount of steam continues to be released by the system, so it is important to continuously check the car for leaks and other things. The level of coolant should be replenished continuously. When the engine is running, the hot coolant will seeks its way out and it is important to make sure that we are able to keep the engine cool all the time, regardless of the usage patterns. Every time the car stops, we should be able to allow the engine to cool down and the whole system should be able to return to normal levels.

We should try to continuously maintain our cooling system and this can be achieved by regularly flushing the radiator. Eventually, deposits will form inside the radiator, especially if we use hard water. It is preferable to use drinking water with minimal mineral level to make sure that there will be minimal level of contaminants inside the radiator. Properly maintained cooling system should allow the car to run at tip-top condition and we can avoid catastrophic situations, such as engine overheats that can damage our car.